Equipment Inspection Form

Visual Inspection Pre-Shift

No obvious leaks or damage

Leaks or damage present

HIGH (Notify Supervisor)

Is the Machine Greased? Skid steer pins, bushing and other pivot point throughout the machine should be greased every 10 hours of operation.

Machine is greased

Machine is NOT greased. Please perform greasing procedure

Check Engine Oil Level

LOW (FIll + Check for Leaks)

GOOD

HIGH (Notify Supervisor)

Check Hydraulic Oil Level

LOW (FIll + Check for Leaks)

GOOD

HIGH (Issue only if reservoir is pressurized))

Check Engine Coolant Level

LOW (FIll + Check for Leaks)

GOOD

HIGH

Check Tires/Track Condition

Tread Low on tires or tracks

Excessive or uneven wear on tires or tracks

Gouges or penetrative objects in tires or tracks

Check Machine Exterior Lights, Horn and Back-Up Alarm